Myalarm V-LCD1 Manual de instrucciones descargar pdf (Pagina 58)

SYSTEM OPERATION

6-52

System 2 Installation / Programming Manual

Door Functions

Time Cancel

When the door is closed before the allotted time, any remaining programmed door release time will be

canceled. This prevents unauthorized "follow throughs".

Door Ajar

After a valid entry or exit, if the door is held open five seconds beyond the programmed door release time, an

event is generated and a “Door Ajar” message will appear on the LCD: Door Ajar 1 hh:mm mm/dd.

(This example shows the Door Ajar on port one). When the door closes, a “Door Closed” event is generated

and a message appears on the LCD: Door Closed 1 hh:mm mm/dd.

Forced Entry

If the door is opened without first using a valid code or by using an RTE button, an event is generated and a

“Forced Entry” message will appear on the LCD: (This example shows the event on port one) Forced

Entry 1 hh:mm mm/dd.

Request-To-Exit

When the RTE button is pushed, the main relay will close for the programmed door release time, an event is

generated and a “Request To Exit” message will appear on the LCD: (This example shows a RTE on port 2)

Request To Exit 2 hh:mm mm/dd.

Status of AC Power

If AC power is lost and the System has a standby battery connected, the following message will be displayed

on the LCD: AC Off hh:mm mm/dd. When AC power is restored AC On hh:mm mm/dd will be

displayed on the LCD.

Reset

System 2 has a "watchdog" circuit that resets automatically on power up or when electrical noise interrupts the

microprocessor. A manual reset button can also create a reset condition. When a reset occurs, a “System

Reset” event will be created and two “Module Reset” messages will also be displayed on the LCD. Other

messages may also appear on the LCD: “Forced Entry” and “Zone On” events will be created if connections

to these terminals are not completed and their inputs are open.

System Reset hh:mm mm/dd

AC On hh:mm mm/dd

Module Reset 1 hh:mm mm/dd

Module Reset 2 hh:mm mm/dd

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 335 336

Sin comentarios

Myalarm V-LCD1 Manual de instrucciones Pagina 58