Myalarm V-LCD1 Manual de instrucciones descargar pdf (Pagina 187)

PC/VDT PROGRAMMING - TIME SCHEDULES

9-181

System 2 Installation / Programming Manual

Trigger State

We're almost there! By programming the DAY / HOLIDAY DATE BOX and the TIME BOX,

you've specified when something should happen. Now, its time to specify what should happen.

The VDT will display the instructions:

This Schedule=01

This Cell=01

1=On,2=Off

Trigger State [2]

At the Trigger State [2] prompt, pick one. If you select On, this will be the time the

user can start to access a door or the time the door will automatically open. If you select Off,

this will be the time the users code or card stops working, or when the door automatically locks.

If you are programming a holiday date and have selected a Trigger Time of 00:00, you may

want to choose 2 to keep the door locked all day.

Sticking with the same example, you would program Cell #1 Trigger State ON. Enter 1, you'll

see:

This Schedule=01

This Cell=01

1=On,2=Off

Trigger State [1]

You may now program another Time Cell for this schedule if you desire.

The VDT will display the instructions:

This Schedule=01

This Cell=01

0=Quit

Choose Time Cell [_0]

If you do not wish to program another Time Cell, enter 0. If you wish to program additional

cells, follow the same programming sequence until you are finished.

When you are finished programming Time Cells in this Schedule enter 0.

You may now program another Time Schedule if you desire. The VDT will display the

instructions:

Enter Schedule #

Use 1 thru 8

0=Quit

Choose Schedule [_0]

Enter the desired Schedule you wish to program, or press 0 to return to the main menu.

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 335 336

Sin comentarios

Myalarm V-LCD1 Manual de instrucciones Pagina 187