Myalarm V-LCD1 Manual de instrucciones descargar pdf (Pagina 205)

PC/VDT PROGRAMMING - ADD/CHANGE CARDS

9-199

System 2 Installation / Programming Manual

Enrolling Cards

In this option, you'll specify a user’s card, the door(s) the user may access, when the user may

access these doors, which outputs will be activated, whether the user is subject to Anti-

Passback, and if the user is Permanent or Temporary.

System Status

When this Option is entered, you will be told how many users are enrolled and how many user

slots are available for programming:

Users Enrolled 0000

Users Remaining 0413

1=Yes,2=No

Want to Continue? [1]

If you wish to enroll users press 1 and ENTER.

User Numbers

The first thing to do is enter a user number, not the card number. This number uniquely

identifies a user and can be thought of as an employee number. After using your card, the

event is printed or displayed on the VDT, it is not the code number that is displayed to identify

the user but the user number. Why? This number may be quite long, and take too much space to

print or display.

The VDT will display the instructions:

Use Up to 4 Digits

0=Quit

Enter User [___0]

At the Enter User [ _ _ _ 0 ] prompt, enter the desired number followed by a

ENTER. If you wish to select user number 1 simply press 1 and ENTER. You do not need to

enter all four digits here. Remember, this is the user number not the Card Number.

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 335 336

Sin comentarios

Myalarm V-LCD1 Manual de instrucciones Pagina 205