Myalarm V-LCD1 Manual de instrucciones descargar pdf (Pagina 111)

LCD PROGRAMMING - ADD/CHANGE DATA CHIPS

8-105

System 2 Installation / Programming Manual

Users Enrolled 0000 þþþþ

Want to Continue? [ 1 ]

Use Up to 4 Digits þþþþ

Enter User [ _ _ _ 0 ]

Enrolling Data Chips

In this option, you'll specify a user’s chip, the door(s) the user may access, when the user may

access these doors, which outputs will be activated, whether the user is subject to Anti-

Passback, and if the user is Permanent or Temporary.

System Status

When this Option is entered, you will be told how many users are enrolled and how many user

slots are available for programming:

Scrolling Options: Users Remaining 0413

1=Yes, 2=No

If you wish to enroll users press 1 and # (enter).

User Numbers

The first thing to do is enter a user number, not the chip number. This number uniquely

identifies a user and can be thought of as an employee number. When the user touches a chip,

and this event is printed or displayed on the LCD, it is not the chip number that is displayed to

identify the user but the user number. Why? This number may be quite long, and take too much

space to print or display.

The LCD will scroll the instructions:

Scrolling Options: 0=Quit

At the Enter User [ _ _ _ 0 ] prompt, enter the desired number followed by a # (enter). If you

wish to select user number 1 simply press 1 and # (enter). You do not need to enter all four

digits here. Remember, this is the user number not the Chip Number.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 335 336

Sin comentarios

Myalarm V-LCD1 Manual de instrucciones Pagina 111