Each Access Control Card or Key Tag can be assigned to 1 or more Access Control Readers. When an Access Control Card or
Key Tag is assigned to specific readers, the user only has access at the assigned readers.
Users do not have access to any reader in which their Access Control Card or Key Tag is not assigned. If a user presents their
Access Control Card or Key Tag at a reader in which their Access Control Card or Key Tag is not assigned, the reader does not
give any indication that a card was presented and a card “declined” event is generated in the system event log.
CARD 1 READERS:
1234567890123456 0=CLR ↕
By default, each configured Access Control Card or Key Tag is valid at all 16 readers. Each valid Access Control Reader is
represented by a single digit number. Starting at the left, 1-9 are Access Control Readers 1-9 respectively, 0 is Access Control
Reader 10, and 1-6 (that appear after 0) are Access Control Readers 11-16 respectively.
To add or remove an Access Control Reader from the list of valid readers, enter the reader number followed by the ' # ' key.
Note: for Access Control Readers 10-16, enter the two-digit reader number followed by the ' # ' key.
If the selected Access Control Card or Key Tag is to be valid at only a few Access Control Readers, you may first clear all Access
Control Readers from the list. To clear all Access Control Readers from the list, enter 0 followed by the ' # ' key. You may then
add the Access Control Readers that are to be valid.
CARD 1 READERS:
1-345----------- 0=CLR ↕
When all of the valid Access Control Readers have been entered, press the ' # ' key to store the new settings in memory.
Log Access Control Card and Key Tag Activity
Each Access Control Card or Key Tag that is enrolled in the system can be configured to log activity whenever the card is
presented at a reader, even if the user was denied access. When enabled, the system will log the Access Control Card Reader
where the card was presented, the user that presented the card, if the card was accepted or declined, and the time and date in
which the card was presented. Each time a card is presented, as long as there is a 5 second delay between each swipe, an event is
generated in the system event log.
CARD 1 LOGGING: 1
0=NO 1=YES ↕
Select 0 (NO) to disable logging for the selected user. Select 1 (YES) to enable logging for the selected user.
Configuring Access Control Cards or Key Tags for Arming and Disarming
Each Access Control Card or Key Tag may be configured to allow the user to arm or disarm the security system at Access Control
Readers that are configured for arming and disarming.
CARD 1 ARM/DISARM: 1
0=NO 1=YES ↕
When a valid card is first presented, the Access Control Card Reader will beep once and all 9 LED indicators will illuminate the
color of the current security arming state for that area.
LED indicators illuminate red: The security system in the respective area is currently armed
LED indicators illuminate green: The security system in the respective area is currently disarmed
When the security system is disarmed, swiping the Access Control Card or Key Tag 3 times (each swipe within 5 seconds of the
previous swipe) will cause the security system to arm to the Away mode. When the security system is armed in any security
mode, swiping the Access Control Card or Key Tag 3 times (each swipe within 5 seconds of the previous swipe) will cause the
security system to disarm.
Select 0 (NO) to disable or 1 (YES) to enable arming and disarming privileges for the selected user.
(8 paginas)
(362 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales