Note: When a valid card or key tag is presented at the reader, all 9 LED indicators will illuminate and remain illuminated until the
“Door Unlock” time expires, even if there is not a physical lock connected to the reader.
Arming or Disarming of the Security System in the Respective Area
Each LEVITON Access Control Card Reader is assigned to an Area. When a valid card or key tag (a card or key tag that is valid
for the current time of day and day of week, that is assigned for the respective reader, and that has arming and disarming
privileges for the respective reader) is presented at the reader 3 times, each presentation within 5 seconds of the previous
presentation of the card, the security system will:
(a) Arm to the Away mode (in the respective area) if the security system is currently disarmed, OR
(b) Disarm the security system (in the respective area) if the security system is currently armed in any security mode
When a valid card is first presented, the Access Control Card Reader will produce a single short beep and all 9 LED indicators
will illuminate the color of the current security arming state for that area. If the card is presented 2 more times within 5 seconds
of the previous presentation of the card, the Access Control Reader will produce a single long beep and the mode of the security
system will toggle between Off (disarmed) and Away. Whenever the security mode changes, the color of the 9 LED indicators
will also change to indicate the new arming state of the area: Red to indicate Away or Green to indicate Disarmed.
Activating Automation Programs
Automation programs can be activated when a card is presented at an Access Control Card Reader. Programs can be activated
when a card is presented at a reader by any user or by a specific user and can be executed if the card was accepted or declined.
For example, swiping a card can disarm the alarm, release the door lock, light a pathway into the house, change the temperature,
and turn on several zones of a whole home audio system, and select their volume and source.
User Setup
Each Access Control Card and Key Tag used is assigned to a code in the LEVITON controller. The Access Control Card or Key
Tag is governed by the validation times/days set for the code (i.e. the Access Control Card or Key Tag is only valid when the
code is valid).
Note: An Access Control Card or Key Tag may be assigned to a code even if the code is disabled (i.e. the user code is set to
0000). Even if the code is disabled, the Access Control Card or Key Tag may be used if it is currently valid.
Each Access Control Card and Key Tag can be:
• Enrolled
• Deleted
• Enabled and disabled
• Assigned to specific Access Control Readers
• Configured to log activity
• Configured for arming and disarming privileges
Access Control Cards and Key Tags can easily be enrolled and configured using an LEVITON console or PC Access software.
Access Control Cards and Key Tags are enrolled and configured under Setup | Codes.
Enrolling Access Control Cards or Key Tags
To enroll Access Control Cards or Key Tags, from the Setup menu, press the 1 (CODES) key. Use the down arrow key to scroll
to the “Card Number” menu item. Access Control Cards or Key Tags can be enrolled into the system using one of the following
methods:
(8 paginas)
(362 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales