Method A) Typing in the ID Number of the Access Control Card or Key Tag:
a. Enter the last 8 digits of the Access Control Card or Key Tag and then press the ' # ' key.
CARD 1 NUMBER:
000 00000 #=CFG ↕
CARD 1 NUMBER:
095 13564 #=DEL ↕
Method B) Enter configuration mode, then swipe the card 3 times at any Access Control Reader configured in the system:
a. Press the ' # ' (#=CFG) key to put the system into configuration mode. The display will show:
CONFIGURE CARD 1
SWIPE CARD 3 TIMES
b. Go to any Access Control Reader configured in the system, and swipe the Access Control Card or Key
Tag 3 times in front of the reader:
CARD 1 NUMBER:
095 13564 #=DEL ↕
Note: you have 3 minutes to complete the operation once the system is put into configuration mode. If an LEVITON Access
Control Card or Key Tag has not been swiped 3 times within the first 3 minutes, the controller will automatically exit
configuration mode.
Deleting Access Control Cards or Key Tags
To delete an Access Control Card or Key Tag that is enrolled in the system, scroll down to the particular “Card Number” menu
item, and then press the ' # ' (#=DEL) key.
CARD 1 NUMBER:
095 13564 #=DEL ↕
You will first be prompted to confirm deletion:
DELETE CARD 1?
0=NO 1=YES
Deleting an Access Control Card or Key Tag will take it out of the system and it will not be valid any longer. You may choose to
delete a card if it has been lost, stolen, or not retuned.
Enabling and Disabling Access Control Cards or Key Tags
When an Access Control Card or Key Tag is enrolled into the system, by default it is enabled. This means that the Access
Control Card or Key Tag may be used if it is valid for the current time of day and day of week.
The Access Control Card or Key Tag may be temporarily disabled so that it can not be used at any Access Control Reader. An
Access Control Card or Key Tag may be temporarily disabled if it was misplaced.
CARD 1 ENABLED: 1
0=NO 1=YES ↕
Select 0 (NO) to disable the selected Access Card or Key Tag. Select 1 (YES) to enable the selected Access Card or Key Tag.
Assign Access Control Cards and Key Tags to Specific Access Control Readers
Comentarios a estos manuales